3Doodler filament/material test and review

6,55 inkl. Mwst.

The 3Doodler has special filament cartridges suitable for the 3D pen. You can try other materials, but we recommend their filament. Irregularities can lead to clogging and 3Doodler cartridges prices are comparable to other materials.

Description

About 3Doodler

3Doodler was a pio­neer of his time and many oth­er 3D pens were devel­oped after­wards. The idea is to only use the end of a 3D print­er and put it in the form of a pen. With the extrud­er in your hand you become the print­er mov­ing it’s print­head freely around. As a result, there is no lim­it­ed build­ing vol­ume for the 3Doodler and you can draw freely. This is why the 3Doodler fil­a­ment car­tridges are an advan­tage since they enable a free 3D print­ing expe­ri­ence with the pen com­pared to mate­r­i­al roles from oth­er machines.

We rec­om­mend using the orig­i­nal 3Doodler fil­a­ment car­tridges, since oth­er sup­pli­ers have a sim­i­lar price. This leads to a safe appli­ca­tion of the 3D pen and you can buy the mate­r­i­al on Ama­zon.
If you want to choose anoth­er fil­a­ment than this, you can find more providers under this link.

Advantage of 3Doodler filament cartridges

Com­pared to oth­er 3D pens, the 3Doodler has fil­a­ment car­tridges and not mate­r­i­al roles. This has the advan­tage that mate­r­i­al does not hang out at the end of the 3D pen, which dis­turbs you while draw­ing. The 3Doodler fil­a­ment can be pur­chased direct­ly from 3Doodler or on Ama­zon which we rec­om­mend to secure high qual­i­ty results, as these are def­i­nite­ly worth the price. Although the 3D Doo­dler fil­a­ment car­tridges seem rel­a­tive­ly short, they nev­er­the­less hold them­selves rel­a­tive­ly long.

amazon buy now button

Disadvantage of the rods or cartridges

The mate­r­i­al car­tridges become prob­lem­at­ic only if they get too short and move too far into the 3D pen. Then it is dif­fi­cult to get them back out again as they do not sim­ply roll back­wards auto­mat­i­cal­ly. There­fore you have to remove the print tip with the 3Doodler tool and squeeze it out with a nee­dle — this is at least the best approach. Even if it sounds com­pli­cat­ed, one quick­ly gets used to the process. On the oth­er hand, you can sim­ply fin­ish the exist­ing mate­r­i­al and add anoth­er 3Doodler fil­a­ment.

These dis­ad­van­tages make not dif­fer­ence com­pared to oth­er 3Doodler fil­a­ment car­tridges. Nev­er­the­less, it is a dis­ad­van­tage of the bars com­pared to fil­a­ment roles and we want­ed to men­tion this fac­tor at this point.

Conclusion

For the 3Doodler pen, we rec­om­mend the appro­pri­ate mate­r­i­al car­tridges from the man­u­fac­tur­er for the device. The 3Doodler fil­a­ment is ide­al for the 3D print­ing pen­cil and we do not rec­om­mend exper­i­ment­ing with oth­er prod­ucts. It can cause prob­lems to use the nor­mal fil­a­ment rolls from oth­er 3D pens or not work at all. Con­se­quent­ly, such attempts are not worth­while, since you do not save mon­ey or increase the qual­i­ty by doing so.

Reviews and expe­ri­ences with the 3Doodler fil­a­ment can be found here »

Möcht­est du den Post teilen oder pin­nen?

Reviews

There are no reviews yet.

Be the first to review “3Doodler filament/material test and review”

Your email address will not be published. Required fields are marked *

You may also like…