3D Printer with middle sized print volume

Less than < 500$

The Wan­hao Dupli­ca­tor i3 3D print­er is a great device for begin­ners who would like to build their own device to a cer­tain degree. For true mak­ers who like to spend more time con­struct­ing a 3D print­er we rec­om­mend DIY-Kits. If you would like to start as quick­ly and sim­ply as pos­si­ble, then you should con­sid­er using a ful­ly assem­bled 3D print­ers. The Dupli­ca­tor i3 scores with a high print qual­i­ty, a rel­a­tive­ly low price and the mid­dle sized print vol­ume.

With the heat­ed build plate, the Da Vin­ci 1.0 has the required fea­ture to print with ABS. In addi­tion, the mid­dle sized print vol­ume sits with­in the closed hous­ing which pre­vents mate­r­i­al cur­va­tures due to tem­per­a­ture changes. XYZprinting’s main neg­a­tive point is their pro­pri­etary fil­a­ment and oth­er prod­uct, which results in increased costs for con­sumers.

500$ – 900$

The Wan­hao Dupli­ca­tor 4S looks like a Maker­bot 3D Print­er for a much low­er price. In addi­tion, the device pro­vides high-qual­i­ty print results through the heat­ed print bed. The dual extrud­er allows users the print­ing with two mate­ri­als or colours. There­fore, the price to per­for­mance ratio of this 3D print­ing is unbeat­able if you can cope with insuf­fi­cient cus­tomer ser­vice from Chi­na.

The Amer­i­can tool com­pa­ny has dared to enter the 3D print­ing mar­ket with the Dremel 3D Idea Builder. The result is a great 3D Print­er with good print qual­i­ty with its mid­dle sized print vol­ume. Espe­cial­ly the closed hous­ing pre­vents mate­r­i­al cur­va­tures when cool­ing. The device come with a pack­age of addi­tion­al tools and the price is rel­a­tive­ly small.

The upper part of the Cre­ator Pro case looks unusu­al and some­what fun­ny. But the func­tion­al­i­ty must not be neglect­ed, even if there are more beau­ti­ful solu­tions than this form. A closed pres­sure cham­ber ensures con­stant tem­per­a­tures which increase the print qual­i­ty. This is impor­tant for a mid­dle sized print vol­ume pre­vent­ing mate­r­i­al dis­tor­tion.

The Zor­trax M200 was and still is almost an insid­er tip in the 3D print­ing indus­try. The machine is suit­able for peo­ple who start with the tech­nol­o­gy as well as for advanced and pro­fes­sion­al users. The Zor­trax M200 deliv­ers high-qual­i­ty print results and is deliv­ered with their own slicer with pro­fes­sion­al fea­tures. Still, the soft­ware is easy to use and offers a Zor­trax exclu­sive extra tak­ing full advan­tage of the mid­dle sized print vol­ume.

This print­er is great for schools with chil­dren, because of the oper­a­tion and secure lock­ing sys­tem. The mid­dle sized print vol­ume is rel­a­tive­ly small com­pared to the expen­sive price. Nev­er­the­less, the CEL Robox RBX1 3D Print­er has to be a suc­cess­ful design. How­ev­er, the Robox fits well into archi­tec­ture offices and design stu­dios pay­ing a lot of atten­tion to the appear­ance.

More than > 1000$

formlabs-form-1-harz-3d-drucker-produktbild-von-der-vorderseite-wahrend-des-druckprozesses

Form­labs 3D print­er were unique devices using liq­uid resin instead melt­ed plas­tic because of which it is not suit­able for every­one. The Form 1+ requires a lot of work and space for the 3D Print­er and clean­ing sys­tem. For every­one who just wants a sim­ple device to have fun with the tech­nol­o­gy we rec­om­mend ser­vice providers to test the results first. This is espe­cial­ly true for all those who start with 3D print­ing or only require a small minia­ture once. The Form 1+ suits edu­ca­tion­al insti­tu­tions or minia­ture builders who are work­ing with small and detailed 3D objects.

Maker­bot Repli­ca­tor is the clas­sic among the mid­dle sized print vol­ume 3D print­ers in the indus­try. You can find a full review of the 5th gen­er­a­tion mod­el as well as the com­plete prod­uct range through the link below. Among them is the Repli­ca­tor + Mini, the old Repli­ca­tor 2 and the large Repli­ca­tor Z18 for insti­tu­tions or com­pa­nies/S­tart-Ups. With the Maker­bot brand, users receive appro­pri­ate 3D Print­ers with high qual­i­ty results at rea­son­able prices.